Only the Panda Model 10 is available on a wholesale basis.
 
 

The Panda Model 10 Loudspeaker is a low volume production run loudspeaker. Every attention to detail in making the link from the loudspeaker transducer to the loudspeaker binding post solder free has been taken. Each pair is personally assembled and tested and matched by myself.

There is no solder in the signal path from the voice-coil fly-wire connection into the WireTail^TM transducer binding post to the Monopole® binding post at the rear of the loudspeaker The result is nothing short of stunning. Near zero colouration, transients as fast as the amplifier rise time, open sound and true 3D holographic sound field.
 

The wholesale price for two pair of Panda Model 10 Loudspeaker's  is:

$27,540.00 per pair.

( A minimum of 4 loudspeakers, or 2 stereo pairs,  due to the very high component costs ).
(   Not inclusive of Vesicular Basalt slab and EPDM floor pad but including other accessories as described on the main loudspeaker page.
Vesicular Basalt Slabs and EPDM floor pad are an extra $2200.00 per pair  ).
Airfreight to almost anywhere in the world is about $3,500.00 ( check before ordering as this changes wildly ) and this takes up to 7 days. Delivery within Australia is free.

If clients do not want the Vesicular Basalt slab and EPDM the performance of the loudspeaker may be compromised.
The  / Mecados^TM fit into the base of the plinth and so give optimum decoupling from the listening room .

If you wish to source the Vesucular Basalt Slab from local sources then the sharp edges should be arrassed to an arrass of 15 millimetres. Only the top face of the Vesucular Basalt  Slab is polished. If clients are desirous of having all facets of the Vesucular Basalt slab polished this will add up to $3000.00 extra per pair over and above the cost of the slabs.

The colour of the Vesicular Basalt slab is a speckled greysourced from in Australia and has very good structural properties. Other colours are available. In total, any structural rock can be adapted provided the appropriate or slightly larger dimensions are followed.

Price variations for the Argentum ( all Silver )  are available on application.
 
 


Images.




Finished Box before insertion of Transducers.

Designer with Box

Rear Panes showing CaneToads Holding  binding post panel in place.

Rear of ATC transducer with custom Wire Tails and CaneToads holding transducer in place.

Finished Box.

Finished Box

For full size image Right click thumbnail and select view image.





Standard Crossover components:
Capacitors: Mundorf Supreme
Inductors: Alphacore  Copper Foil.
Resistors: Combination of Deuland and Mundorf.
Internal Wiring: OCC 6N Copper multiple single cores of 0.9mm for the Woofer;  OCOS for the Tweeter ( it just is the best ).

Upgrades:
Capacitors:
Mundorf Silver, Silver Gold, foil in Oil etc inquire
Deuland anything.
Whatever else client may want.

Inductors:
Alphacore Silver Foil.

Internal Wiring:
6N OCC Silver.

Return to Catalog contents page

Goto purchasing conditions page