Morning Glory

The  Morning Glory  interconnect cable from Bocchino Audio is a radical approach to wire and cable construction.
Utilising either the  BrendaTM B2 RCA or Brenda B3 RCA connector Morning Glory represents the first of the Palm Friday 2004 topology designs . What the design allows is the rapid evacuation of the return line in the dual nature of cable topology ( Signal and Return ). Congestion is cleared up rapidly enabling a clean and crisp audition of the music being relayed.
 

The Morning Glory cable design does not emphasise  any single  frequency band at the exclusion of any other. Effortless liquidity with no constraints on signal throughput are evident from the first listen. Instruments and vocals become well placed in an acoustic space. The Morning Glory cables possesses  one of the quietest background of any cable heard. Some would say very dark! Dynamic range is almost open ended allowing the reproduction of music with soft being soft and allowing the loudest passages through unimpeded!  There is no 'grain' often complained of in cables using lesser connectors, brass and minimalist designs. Music reproduction is more wholesome and better defined. Everything is more tightly controlled with instruments  clearly marked at their intended location in the sound image portrayed and do not wander. Listening is as fatigue free as is technologically possible. There is no perceptible smearing of the acoustic holographic image location and there is a better portrayal of image depth and 3D acoustic space! Clearly defined spatial cues of the performance venue are more discernible giving a "being there" feeling when listening. The Morning Glory has the uncanny property of keeping time and pace with the most complex and dynamic passages without running out of breath,ever!
The first result is that one listens to everything again and again garnering more information than was possible before.
Many listeners have noted the timbral accuracy of all instruments heard with the Morning Glory; Harp pluck and violin sonnance the difference between oboe and bassoon and clarinet are more marked and obvious while electronic keyboard is heard as pure notes without fuzz or deterioration. Distinctions and spacing between piano and harpsichord notes played at a rate of knots are clear without one strike rolling over to the next. Each note is given its pride of place with effortless tenacity and lucidity.

Percussion and bass drum slam are the most realistic ever translated from source to speaker. There is a real kick here!

Morning Glory cables are fully hand built and tested by Bocchino Audio.


The Morning Glory cable topology utilises a  Large Pure Copper ( ?99.994%+ Cu ) return Earth-Bus and  platted twin Fine Silver Ribbon ( ?99.996%+ )  signal wire surrounded by numerous shields and drains. Secured into either theBocchino Audio Designed   BrendaTM B2 RCA or Brenda B3 RCA at high pressure with the compression engine in both the signal and return locations. Available only with   Silver Plated Copper RCA or R9 AXLRTM pins1.
BrendaTM B2 and B3 RCA's are manufactured from solid Pure Copper Billet 99.996%+ Pure Copper !

If considering the purchase of this cable realise that your RCA spacings must be greater than 23mm ( 3/4 inch ) horizontally and 45mm vertically.  Essentially this means that the cable cannot be used in appliances where the spacings are too close.
 

Image showing Silver Plated Brenda B2#3 with Morning Glory Cable


All Morning Glory Cables are hand built in house and only available direct from Bocchino Audio.
Balanced
The Morning Glory is also available with BAXLRTM  connectors for balanced line appliances and also in hybrid assembly for RCA at one end and BAXLRTM at the other.

GOTO MORNING GLORY PRICING


Reviews using Morning Glory

REVIEW AT CABLE ASYLUM BY RAYMOND R


Morning Glory IC Review at 6moons


Edgar Kramer of 6moons reviewing Nuforce amplifier delights in using the Morning Glory.  Click here for review August 2005







Return to Bocchino Audio contents page
 
 

Note 1
 ( may require periodical maintenance to clear sulphide deposits if they occur, check every 6 months).