One fortuitous design property of using Pure Copper for the return polarity of the BrendaTM connector is that Pure Copper delivers the absolute best in shielding properties and earthing characteristics compared to any other material used to manufacture RCA connectors today.
In fact, the very design topology of the RCA connector plug is to ensure that no electromagnetic interference of any sort reaches the centre conductor. Hence the need for a full shield not only on the cable but also the topology of the plug is complementary to the cable shielding ensuring that a full envelope earthing geometry is maintained at and between plug/socket interface.
Requiring that the return coupling of the RCA connector fully envelopes the chassis socket for a full 360 degrees.
The obvious consequence of using Pure Copper as the material for the return path on the BrendaTM connectors is that all return signals have the fastest possible return path. The size of the outerbodies of the BrendaTM connectors are large due to the softness of Pure Copper and the necessity to design in strength into the shapes used. Couple this to the excellent electrical conductivity of Pure Copper and the speed of the return is most likely the fastest in the industry today. The large outer surface areas are extremely efficient in capturing all stray RF and sending it to earth, as a return should.Only connectors that connect fully by totally enveloping their mating to their respective socket are able to offer complete earthing isolation for the signal carrying center conductor, the better the conductivity of the enveloping metal conductor, the better the isolation.
Advantage for BareWire BrendaTM's.
The benefits of these design principles and geometries are most apparent and beneficially illustrated in the use of the Bare Wire BrendaTM's. The BrendaTM B2 has a half chassis Pure Copper ClawLock which fully isolates the front section of the connector, with the return bay cylinder integrated into the return body. These two design characteristics enable the BrendaTM B2 to be the absolute quietest RCA plug anywhere in the world today.
The BrendaTM B3's Pure Copper ClawLock delivers the same full envelope earthing geometry as the BrendaTM B2 but for the full length of the operational component parts of the BrendaTM B3 connector assembly.
The BrendaTM B11 has similar earthing quietening characteristics as the BrendaTM B7 with a direct signal path.
The Bare Wire BrendaTM's other defining characteristic that also works well in their favour is the fact that the interconnect cable transmission wires are firmed into their mounting locations with high pressure in a copper paste bath. This delivers the most immediate possible interface transition transmission of the electrical signal. Better than soldering; better than arc welding ( which destroys the linear crystalline characteristics of the wire ) better than any optical connection ( which requires upward and then downward translation to and from copper circuits ).So when the user listens to the bare wire BrendaTM's there are many characteristics that contribute to the effortless listening and the superb dynamic range that these connectors offer.
The quality of the audio information is more articulate with greater depth and more timbral accuracy for all musical information and instruments than is possible from any other RCA connector today. Vocals! as real as it can get!