CanetoadsTM

CaneToads^TM

(Speaker Amulette.)

The CaneToad^TM is fabricated from High Tensile Steel and is 38mm long and 15 mm wide at its widest and 9mm thick with an M5 thread at one end and a plain hole at the other end for a securing screw.

CaneToads^TM are placed behind the speaker baffle panel. A coach screw holds the CaneToad^TMsecurely in place at the rear while a bolt is used from the front panel to secure the loudspeaker transducer with considerable pressure against the front panel via the CaneToad^TM. By allowing the use of a bolt instead of relying on a wood-screw to keep the transducer secure this results in considerable improvement in sonic definition and 'air' across the audio spectrum. One other consequence is the improvement in stability and projection of the Stereo Holographic Image Focal Field.

CaneToad assembled	Assembly components	Unassembled

CaneToads Holding transducer in place.

Return to Bocchino Audio Contents page.

Goto CaneToad^TM prices.